How to connect a Netatmo Weather Station with the Zerofy app
Availability
This integration is only available for zerofy.
Preconditions
- You have a Netatmo account and a Netatmo Weather Station set up in the Netatmo app or on my.netatmo.com.
- Only the Weather Station product line is supported. Netatmo thermostats, valves, cameras and other Netatmo Home products are not connected by this integration.
Connecting your Netatmo Weather Station with Zerofy
- Open sensor setup in Zerofy and select
Netatmo. - Zerofy opens the Netatmo login page. Sign in and grant access to your weather station data.
- Back in Zerofy, select which modules to connect.
Supported Modules
Zerofy creates one sensor per module, not per station. A station with an outdoor module therefore appears as two sensors.
| Netatmo module | Measures | Connected as |
|---|---|---|
| Indoor base station | Temperature, humidity, CO₂, air pressure, noise | Indoor sensor |
| Outdoor module | Temperature, humidity | Outdoor sensor |
| Additional indoor module | Temperature, humidity, CO₂ | Indoor sensor |
| Wind module | — | Not connected |
| Rain gauge | — | Not connected |
Features and Things to Know
Once connected, you can:
- See temperature, humidity, CO₂, air pressure and noise readings, stored in 5-minute intervals.
- See the battery level of your radio modules on the device.
Netatmo stations upload roughly every 10 minutes. Zerofy collects every 15 minutes with a one-day look-back, so short outages are filled in automatically.
These sensors are read-only. They cannot be switched or controlled, they consume no energy, and they never appear in Autopilot plans or in your energy consumption figures. Their purpose is to give Zerofy accurate indoor and on-site outdoor conditions for heating and cooling analysis.
Known Limitations
- Wind modules and rain gauges are not collected.
- Netatmo thermostats and valves are not part of this integration.